McWane Ductile Ohio - Poles Production Engineer II - Fabricated Products Job at McWane, Inc.
Overview:
Who we are looking for: The fabricated products group is looking for an experienced engineer interested in driving automation and improving manufacturing processes.
Note: Other duties may be assigned. This position is a full-time (minimum 40 hours per week) on-site position. Qualifications:
Physical Demands: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, walk, sit, use hands; reach with hands and arms; talk and hear. The employee is occasionally required to climb or balance, stoop, kneel, bend, crouch or crawl, and taste or smell. The employee may occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and high, precarious places. The employee is frequently exposed to fumes or airborne particles, outside weather conditions, and extreme heat or cold. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, electrical shock, and vibration. The noise level in the work environment is occasionally very loud.
McWane is an equal employment opportunity employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, disability, veteran or service member status, marital status, citizenship status, or any other category protected by federal, state, or local law.
Who we are: Innovative. Collaborative. Resourceful. A place to learn and achieve. The Fabricated Products Group is a rapidly growing division situated at McWane’s Coshocton, Ohio location. This division consists of the flange pipe and poles fabrication departments. Each department presents its own unique set of opportunities and challenges as we progress into the world of automation and smart manufacturing.
Who we are looking for: The fabricated products group is looking for an experienced engineer interested in driving automation and improving manufacturing processes.
The Production Engineer is responsible for working in cross-functional teams to solve problems related to the manufacturing of fabricated pipe and ductile iron poles. This includes a mix of project management, process planning, and machine design.
This person will divide their time between both the office and the shop floor; the ratio will vary depending on project requirements. A successful candidate will display independence, adaptability, and a desire for continuous learning and professional development.
Responsibilities:
Essential Duties and Responsibilities:
- Support manufacturing, innovation, and implementation in several disciplines including CAPEX project management, new machine design, modifying existing equipment, identifying waste, and supporting new product development.
- Pilot projects through problem definition, planning, design, machine specification, equipment quoting and procurement, installation, start-up, and long-term sustainment of performance improvements.
- Conduct simultaneous engineering with automation, controls, electrical, mechanical, and process engineers to design and implement innovative solutions for complex manufacturing issues.
- Manage collaboration with environmental, safety, production, and maintenance staff to proactively identify and address potential concerns; Conduct research and analyze process data from identified improvement areas to determine severity and root cause of issues
- Keep management informed of any changes to budgets or schedules throughout the project lifecycle.
Note: Other duties may be assigned. This position is a full-time (minimum 40 hours per week) on-site position.
Required Qualifications:
- A bachelor’s degree in Mechanical Engineering or related discipline. Consideration will be given to exceptional candidates with an alternative combination of education and experience.
- Minimum of 3 years of experience in manufacturing project management or machine design
- Capability to read and interpret mechanical drawings and blueprints.
- Experience creating and modifying drawings using 2D and/or 3D CAD software.
- Capacity to define and interpret a variety of both abstract and concrete variables.
- Ability to motivate through action and do what it takes to keep the project moving forward.
- Adeptness at understanding an audience and modifying the message to provide meaning to all listeners.
- Hydraulic and pneumatic troubleshooting, specification, and/or system design experience
- Ability to work alone or in a cross-functional engineering team.
Preferred Qualifications:
- Automation experience including specification, CNC programming, tooling design, equipment procurement, and installation.
- CAPEX project experience in budgeting, obtaining quotes, scheduling, and change management.
- Lean Six Sigma familiarity.
- Knowledge of the principles of machining
- Knowledge of the principles of HVAC and dust collection
- Experience mentoring junior engineers, interns, or co-ops.
Physical Demands: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, walk, sit, use hands; reach with hands and arms; talk and hear. The employee is occasionally required to climb or balance, stoop, kneel, bend, crouch or crawl, and taste or smell. The employee may occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
Work Environment: The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and high, precarious places. The employee is frequently exposed to fumes or airborne particles, outside weather conditions, and extreme heat or cold. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, electrical shock, and vibration. The noise level in the work environment is occasionally very loud.
Please Note :
www.epokagency.com is the go-to platform for job seekers looking for the best job postings from around the web. With a focus on quality, the platform guarantees that all job postings are from reliable sources and are up-to-date. It also offers a variety of tools to help users find the perfect job for them, such as searching by location and filtering by industry. Furthermore, www.epokagency.com provides helpful resources like resume tips and career advice to give job seekers an edge in their search. With its commitment to quality and user-friendliness, Site.com is the ideal place to find your next job.