Primary Job Function

Operates computer and manually controlled machines to fabricate materials, loads and cycles parts, runs production lots, detects malfunctions in machine operations and communicates with co-workers and Supervisor regarding production runs.

Note: This position operates on Swing Shift (2:15pm 10:45pm)

Essential Duties and Responsibilities

• Lathe- Working on lathes such as Haas TL-2, Manual Lathe
• Mill- Operate, monitor, and complete production jobs on CNC Mills, checking parts to print, making offset changes, and producing quality parts. Working on mills such as Haas or Brother verticals.
• CNC setup and operation; tech tools, load programs, and set/adjust work/tool offsets accordingly.
• Utilizes Haas controls to input G & M code
• Calculates feeds and speeds
• Set up, tool selection and operation of parts with standard or custom specifications
• Studies blueprints, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece.
• Completes set-ups on multiple CNC Vertical Mills
• Operates computer numerical control machines to fabricate, load, and cycle parts
• Runs production lots and communicates with co-workers regarding production runs to maintain a safe, organized and clean work environment.
• Proves out and optimizes programs and fixturing for repeat parts
• Troubleshoots and operates as needed across multiple machines
• Detects malfunctions in machine operations such as worn or damaged cutting tools
• Reads prints and inspects parts for conformance, typically +/- .005 tolerance
• Checks parts using basic measuring tools such as calipers, micrometers, and depth gauges.
• Verifies conformance of finished work piece as specified
• Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment
• Keeps work area clean and organized
• Performs other duties as assigned

Minimum Qualifications and Experience

Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably.

• 3- years in a metal manufacturing environment with extensive experience in precision lathe and mill setup and operation.
• Experience with all manual inspection equipment and FAI processes
• Must be capable of reading drawings and making offset changes independently
• Must have extensive machine shop/metal working skills and grasp of fundamentals
• Manual machining is preferred but not required
• Knowledgeable using controls for Haas
• Demonstrated ability to set up CNC machine loading programs, tools, fixtures, and setting tool offsets.
• Ability to read and understand machine codes, set up own jobs and run first parts
• Ability to set-up machining operations per setup sheets, adjust programs as needed
• Mastercam/G&M code experience a strong plus
• Knowledge of using and interpreting results from various measuring tools.
• Excellent blueprint reading skills
• Must have good math skills including trigonometry and ability to work with decimals
• Must be comfortable working with close tolerances (thousandths) and be able to read and interpret engineered drawings in decimal and fractional inch units.
• Ability to accurately inspect parts for conformance (typically +/- .005 tolerance) using basic measuring tools such as calipers, micrometers, and depth gauges.
• Trade school training and lean manufacturing environment experience a plus
• Proficient computer skills, including Microsoft Office
• Strong attention to detail
• Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision both individually and as part of a team.
• Ability to work overtime as required
• Ability to read, write, and communicate effectively in English

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear.
• The employee must frequently lift and/or move up to 50 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
• May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels.

Job Type: Full-time

Pay: $17.85 - $25.20 per hour

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Vision insurance

Schedule:

• 8 hour shift
• Evening shift

Supplemental pay types:

• Bonus pay

Ability to commute/relocate:

• Tualatin, OR 97062: Reliably commute or planning to relocate before starting work (Required)

Experience:

• Metal Manufacturing: 3 years (Preferred)
• Machining: 3 years (Required)

Shift availability:

• Night Shift (Required)

Work Location: In person

Please Note :
www.epokagency.com is the go-to platform for job seekers looking for the best job postings from around the web. With a focus on quality, the platform guarantees that all job postings are from reliable sources and are up-to-date. It also offers a variety of tools to help users find the perfect job for them, such as searching by location and filtering by industry. Furthermore, www.epokagency.com provides helpful resources like resume tips and career advice to give job seekers an edge in their search. With its commitment to quality and user-friendliness, Site.com is the ideal place to find your next job.